Ball-End Hex Tools: A Guide
{
“@context”: “https://schema.org”,
“@type”: “BreadcrumbList”,
“itemListElement”:
[
{
“@type”: “ListItem”,
“position”: 1,
“item”: {
“@id”: “https://www.kctool.com/”,
“name”: “主页”
}
},
{
“@type”: “ListItem”,
“position”: 2,
“item”: {
“@id”: “https://www.kctool.com/blog/”,
“name”: “Blog”
}
},
{
“@type”: “ListItem”,
“position”: 3,
“item”: {
“@id”: “https://www.kctool.com/blog/ballend-hex-tools-a-guide/”,
“name”: “Ball-End Hex Tools: A Guide”
}
}
]
}
Ball-End Hex Tools: A Guide
Posted by Collin on Apr 20th 2023
We have grown so accustomed to getting free L-keys in our furniture boxes that we take for granted the inferior quality of them and are very likely just to throw the tool away with the plastic bag it came in when we’re done. As any reader of this blog should know though, we buy good quality tools and demand only the best, so why use that freebie in the first place? A good set of L-keys will last you decades without showing wear and tear. But there is one big advantage to buying a quality set of L-keys and that’s the ball end.
There are many well-made sets of L-keys that have the standard straight hex end, but if you are buying the set for life you should strongly consider spending a few extra bucks and get ball-end hex keys. The advantages are simple, but before we get there, a little history.
Various documents suggest that somewhere in the 1800s the hexagonal screw head was theorized about but never produced. Though he may not have been the first person to produce them, William G. Allen of Allen Manufacturing Company was the first to patent the process of forming screw heads around a die in 1910. Therefore, many people call it an Allen Wrench, much like many people call a tissue a Kleenex. The Allen name is a registered trademark however, so the term hex key or L-key is the generalized version.
In 1964, John Bondhus of the Bondhus corporation invented what they trademark as the Balldriver hex key. It was a simple thought, really. What if the end of the hex driver was manufactured to a ball shape so that the hex shape can be inserted at an angle? The idea took off and today ball-end hex keys are made by several manufacturers, including our much-loved German Brands.
So what is the advantage? It comes down to flexibility. A standard L-key can’t always fit into tight spots and definitely can’t be turned at an angle. That’s where the ball comes in. Because of its shape, the ball-end hex can be inserted into the fastener from (typically) up to a 25-degree angle. This means you can adjust to the fastener and not have the fastener adjust to your tool (which typically doesn’t work out so well). Don’t go crazy though, as nothing can beat the tight fit of a straight hex directly into the screw. You will notice that many of the brands put the ball on only one end for this very reason.